RCCrawler Forums

WooPigSooie · 05-24-2012, 03:48 PM

I’ve been asked several times lately for a list of required and recommended parts for the XR10 modification to the AX10 axles so I decided to write up a list. This thread will include part numbers and some RCC vendors who carry them. It will also have my recommendations on what to use. These recommendations are purely my opinion and can be replaced with your favorite brand of hop-up parts.

RCC Vendors That Carry Some or All of These Parts
Vanquish Products
Crawler Innovations
TCS
RCP Crawlers
RPP Hobby

Required XR10 Parts
1. XR10 Universals – AXI30563
2. XR10 Straight Axles – AXI30758 (You will need two of the 110mm shafts so either order two of this part or cut and grind the longer 117mm shaft.)
3. XR10 Knuckles – AXI80061 ( I prefer Vanquish Incision Knuckles)
4. XR10 C-Hubs – AXI80062 (I prefer Vanquish Incision C-Hubs)
5. XR10 Lockouts – AXI80064 (I prefer Vanquish Incision Lockouts)

Beef Tube Options
1. Biggin69 (Longer Beef Tubes)
2. Chris_The_Battery_Man (Wide Splined – Front)(Wide Un-Splined – Rear)

Hardware Needed (Note: Your hop-up parts may include hardware.)
1. M3x6mm Button Head x 24 (Beef Tube and C-Hub Installation)
2. M3x8mm Button Head x 8 (Knuckle and Lockout Installation)

Other Recommended Parts
1. Your favorite brand of locker/spool.
2. Under Drive Rear Gear Set (43/13) – AXI30402
3. Over Drive Front Gear Set (36/14) – AXI30401

I hope this helps someone. If there is any interest I can also post a list of parts needed for building axles and a transmission from scratch. If you have any questions shoot me a PM

Link to my 2.2S

05-24-2012, 03:48 PM	#1
WooPigSooie Quarry Creeper Join Date: Nov 2009 Location: Central Arkansas Posts: 309	XR10 Mod for AX10 Axles Parts List I’ve been asked several times lately for a list of required and recommended parts for the XR10 modification to the AX10 axles so I decided to write up a list. This thread will include part numbers and some RCC vendors who carry them. It will also have my recommendations on what to use. These recommendations are purely my opinion and can be replaced with your favorite brand of hop-up parts. RCC Vendors That Carry Some or All of These Parts Vanquish Products Crawler Innovations TCS RCP Crawlers RPP Hobby Required XR10 Parts 1. XR10 Universals – AXI30563 2. XR10 Straight Axles – AXI30758 (You will need two of the 110mm shafts so either order two of this part or cut and grind the longer 117mm shaft.) 3. XR10 Knuckles – AXI80061 ( I prefer Vanquish Incision Knuckles) 4. XR10 C-Hubs – AXI80062 (I prefer Vanquish Incision C-Hubs) 5. XR10 Lockouts – AXI80064 (I prefer Vanquish Incision Lockouts) Beef Tube Options 1. Biggin69 (Longer Beef Tubes) 2. Chris_The_Battery_Man (Wide Splined – Front)(Wide Un-Splined – Rear) Hardware Needed (Note: Your hop-up parts may include hardware.) 1. M3x6mm Button Head x 24 (Beef Tube and C-Hub Installation) 2. M3x8mm Button Head x 8 (Knuckle and Lockout Installation) Other Recommended Parts 1. Your favorite brand of locker/spool. 2. Under Drive Rear Gear Set (43/13) – AXI30402 3. Over Drive Front Gear Set (36/14) – AXI30401 I hope this helps someone. If there is any interest I can also post a list of parts needed for building axles and a transmission from scratch. If you have any questions shoot me a PM Link to my 2.2S Last edited by WooPigSooie; 08-09-2012 at 01:19 AM.

XR10 Mod for AX10 Axles Parts List - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
newbie need help parts list for overdrive mod on mrc pro	hammer29	Losi Mini-Rock Crawler	22	06-21-2015 02:20 PM
Axial parts list for scratch XR10 build?	jubilee	Axial XR10	7	04-11-2012 08:42 PM
X-Factor axles - PARTS LIST!!!	cman_1500w	XTM Crawler	15	10-24-2004 11:44 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

RCCrawler Forums

Thread: XR10 Mod for AX10 Axles Parts List