Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial Yeti XL


Thread: Robinson Racing Gen 3 slipper for 1/10 Yeti works.

LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-13-2015, 05:02 PM   #1
Rock Crawler
Join Date: Dec 2014
Location: Rhode Island
Posts: 504
Thumbs up Robinson Racing Gen 3 slipper for 1/10 Yeti works.

I don't know how many of you have inspected your slipper discs and aluminum pads but they gall up really bad and don't allow for much slip at all if any. I "THINK" this is adding to a lot of the front diff deaths. I saw the 1/10 Yeti robinson Gen 3 kit and it looked real beefy. The 1/10 Yeti and the Yeti XL have the same output shaft diameter. It is the same set up.... I have had Robinson Racing stuff in the past and now on my big block Maxx so I ordered it up. I purchased part # 1564. You will have to remove the trans and open up the output shaft hole in the plastic front trans case a little so the Robinson steel support hub clears. Now this spur is 64 tooth so you will need a smaller pinion. Stock is 68/15 which is 4.53:1 ratio. So I used a 14 tooth pinion...Thats a 64/14 which is a 4.57:1ratio. Pretty much the same..Just a touch lower gearing than stock. I also ordered a 13 tooth pinion which will be a 4.92:1 ratio. That's a bit lower than stock so we will see. I can't test it because of the three million feet of snow here in RI right now but it all fits and should work great. Here it is installed.


Last edited by Fordfreak95; 02-14-2015 at 08:17 AM.
Fordfreak95 is offline   Reply With Quote

Robinson Racing Gen 3 slipper for 1/10 Yeti works. - Similar Threads
Thread Thread Starter Forum Replies Last Post
Robinson Gen 3 slipper sixhundred71 Axial Wraith 17 07-31-2015 01:08 AM
Robinson Racing Gen3 Slipper ednerin Axial Yeti XL 1 01-23-2015 08:08 PM
Robinson Racing slipper unit JDIRCC Axial Wraith 6 10-30-2014 05:52 PM
question for you all on the Robinson racing slipper? champ198 Axial Wraith 8 07-04-2013 06:09 AM
robinson racing slipper 48p kmas Axial Wraith 3 05-11-2012 10:08 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 10:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com