|
| LinkBack | Thread Tools | Display Modes |
01-27-2007, 10:36 AM | #1 |
I wanna be Dave Join Date: Jan 2006 Location: Iowa, the antirecreation state!
Posts: 2,227
| *** Twin Force Upgrades ***
Spent a lot of time on the Kyosho sight collecting part#'s from all 777's, 7.5's, and Inferno's. Most will work cause they are common between all the buggies/truggies/trucks. Pretty sure everything on this list works on a Twin. Big thanks to ALL who have contributed!! Be sure to check out post #11 & #35 for non-Kyosho parts that will work too!! Post #62 has Twin trany part #'s and brake down. Post #78 contains CVD(U joint) info. 17mm adapters at the bottom of this post. KYOSHO PARTS Gears Mad Force helical set #MA050(13/43) Helical ring: 43t #IS007 and pinion: 10t #IS008 This part supersedes to IS102 Straight ring: 43t #IF106 DRIVE BEVEL GEAR(43T) #IF20 and pinion: 13t #IF21 Bevel set, spider and side gears(4 spiders) #IF102 Bevel Shaft #97001(4x27mm/6pcs) Diff case #IF103 Complete diff w/ steel ring gear #IF343 Part Number Description Qty. in pkg. BRG005 8 X 16 Ball Bearing - 2 BS107 Bevel Shaft - 2 IF30-1 Diff Case Packing - 1 IF39 1.6 x 14mm Shaft - 2 IF101 Differential Shaft Set - 2 IF102 Differential Bevel Set - 4 (gears and washers) IF103 Differential Case - 1 IF106 38mm Bevel Gear 43t - 1 ORG06 O-Ring - 2 1149 F/H Tapping Screw - 4 1162 Set Screw - 1 Shocks and Springs #BSW73 (2)(Twin/Mad Force turbo shocks) (these are aluminum rear shocks) I read these rear shocks are a little longer than stock with a 3.5mm shaft. Not sure the difference between the two? Shock set (2) #IF326B #IFW141 (2) Springs These go with both#IFW141/#IF326B shock green #IFW33G white #IFW33W blue #IFW33BL red #IFW33R (this is the stock Twin spring) These are a new long spring. "For a progressive feel" Kyosho yellow #IF336-1616 (16-1.6/L=98mm) orange #IF336-1716 (17-1.6/L=98mm) green(soft) #IF336GR white(hard) #IF336W blue(?) #IF336BL Ball ends 6.8mm straight(12) #1296 offset #IS053 flange ball(4)#IF313 ball(10) #W0202 Ball(10) #BS46cheaper Pivot Ball (3) #IFW134 M3x6 tapered washer(10) #W0141Vkinda spendy$$$ 7.8mm balls, same as stock shocks #IF55 #IF56 Shafts Short side #BS45 Long side #MA024 Drive #IF143 Hubs Twin, Burns/Inferno #BS19 [img][/img] Inferno GT,777 #IF6B? 17mm adapters IFW107B IFW106B IFW326BL (narrower than standard IFW107B) IFW327BL (6mm wider than standard) IFW328BL (9mm wider than standard0 Add what you all have found and correct from my list. Hope this helps everyone. Last edited by Bart bender; 06-24-2011 at 08:20 PM. |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/kyosho-crawlers/58270-%2A%2A%2A-twin-force-upgrades-%2A%2A%2A.html | ||||
Posted By | For | Type | Date | |
kyosho madforce kruiser ve - Monster Trucks @ URC Forums | This thread | Refback | 02-22-2013 06:29 AM |
Thread Tools | |
Display Modes | |
| |