*** Twin Force Upgrades *** Spent a lot of time on the Kyosho sight collecting part#'s from all 777's, 7.5's, and Inferno's. Most will work cause they are common between all the buggies/truggies/trucks. Pretty sure everything on this list works on a Twin. Big thanks to ALL who have contributed!! Be sure to check out post #11 & #35 for non-Kyosho parts that will work too!! Post #62 has Twin trany part #'s and brake down. Post #78 contains CVD(U joint) info. 17mm adapters at the bottom of this post. KYOSHO PARTS Gears Mad Force helical set #MA050(13/43) http://www.rccrawler.com/forum/attac...1&d=1198443503 Helical ring: 43t #IS007 http://i17.photobucket.com/albums/b8...ae2d16b86e.jpg and pinion: 10t #IS008 http://i17.photobucket.com/albums/b8...1fec77615e.jpg This part supersedes to IS102 http://i17.photobucket.com/albums/b8...21d1a6bf1d.jpg Straight ring: 43t #IF106 http://i17.photobucket.com/albums/b8...cccaaa3e17.jpg DRIVE BEVEL GEAR(43T) #IF20 http://i17.photobucket.com/albums/b8...3c051fa157.jpg and pinion: 13t #IF21 http://i17.photobucket.com/albums/b8...898ad3da39.jpg Bevel set, spider and side gears(4 spiders) #IF102 http://i17.photobucket.com/albums/b8...601dc3bd92.jpg Bevel Shaft #97001(4x27mm/6pcs) http://i17.photobucket.com/albums/b8...0e2fdc19a3.jpg Diff case #IF103 http://i17.photobucket.com/albums/b8...b7ce046db7.jpg Complete diff w/ steel ring gear #IF343 Part Number Description Qty. in pkg. BRG005 8 X 16 Ball Bearing - 2 BS107 Bevel Shaft - 2 IF30-1 Diff Case Packing - 1 IF39 1.6 x 14mm Shaft - 2 IF101 Differential Shaft Set - 2 IF102 Differential Bevel Set - 4 (gears and washers) IF103 Differential Case - 1 IF106 38mm Bevel Gear 43t - 1 ORG06 O-Ring - 2 1149 F/H Tapping Screw - 4 1162 Set Screw - 1 Shocks and Springs #BSW73 (2)(Twin/Mad Force turbo shocks) (these are aluminum rear shocks) http://i17.photobucket.com/albums/b8...ef97b1891a.jpg I read these rear shocks are a little longer than stock with a 3.5mm shaft. Not sure the difference between the two? Shock set (2) #IF326B http://i17.photobucket.com/albums/b8...b49f6a27db.jpg #IFW141 (2) http://i17.photobucket.com/albums/b8...9d45dc80bb.jpg Springs These go with both#IFW141/#IF326B shock green #IFW33G http://i17.photobucket.com/albums/b8...6f9caf7e08.jpg white #IFW33W http://i17.photobucket.com/albums/b8...9a08d81e0b.jpg blue #IFW33BL http://i17.photobucket.com/albums/b8...07fe323f6a.jpg red #IFW33R (this is the stock Twin spring) http://i17.photobucket.com/albums/b8...5d72d1a433.jpg These are a new long spring. "For a progressive feel" Kyosho yellow #IF336-1616 (16-1.6/L=98mm) http://i17.photobucket.com/albums/b8...6487d32146.jpg orange #IF336-1716 (17-1.6/L=98mm) http://i17.photobucket.com/albums/b8...36ffbedd6d.jpg green(soft) #IF336GR http://i17.photobucket.com/albums/b8...5931c234db.jpg white(hard) #IF336W http://i17.photobucket.com/albums/b8...f3cb459703.jpg blue(?) #IF336BL http://i17.photobucket.com/albums/b8...7a197f7a8b.jpg Ball ends 6.8mm straight(12) #1296 http://i17.photobucket.com/albums/b8...84829be3e9.jpg offset #IS053 http://i17.photobucket.com/albums/b8...16a9d93d53.jpg flange ball(4)#IF313 http://i17.photobucket.com/albums/b8...3a91ae94-8.jpg ball(10) #W0202 http://i17.photobucket.com/albums/b8...8e10831f-9.jpg Ball(10) #BS46cheaper http://i17.photobucket.com/albums/b8...feba8dd3-6.jpg Pivot Ball (3) #IFW134 http://i17.photobucket.com/albums/b8...2e6fd5e7-5.jpg M3x6 tapered washer(10) #W0141Vkinda spendy$$$ http://i17.photobucket.com/albums/b8...4b78a0a4-6.jpg 7.8mm balls, same as stock shocks #IF55 http://i17.photobucket.com/albums/b8...7ef39d9c-6.jpg #IF56 http://i17.photobucket.com/albums/b8...27c06a03-6.jpg Shafts Short side #BS45 http://i17.photobucket.com/albums/b8...a004e267-5.jpg Long side #MA024 http://i17.photobucket.com/albums/b8...c58606b91e.jpg Drive #IF143 http://i17.photobucket.com/albums/b8...21d90cbe-4.jpg Hubs Twin, Burns/Inferno #BS19 [img][/img] Inferno GT,777 #IF6B? http://i17.photobucket.com/albums/b8...8998be84c9.jpg 17mm adapters IFW107B http://i17.photobucket.com/albums/b8...e8de0836bf.jpg IFW106B http://i17.photobucket.com/albums/b8...38681457f7.jpg IFW326BL (narrower than standard IFW107B) http://i17.photobucket.com/albums/b8...4a9f30a385.jpg IFW327BL (6mm wider than standard) http://i17.photobucket.com/albums/b8...b5e4340451.jpg IFW328BL (9mm wider than standard0 http://i17.photobucket.com/albums/b8...b54d721260.jpg Add what you all have found and correct from my list. Hope this helps everyone."thumbsup" |
On the helical gear sets. The Twin/Mad force sets are 3.3 stock,which you probly know. The gears for the Inferno ST are helical also and will work in the Twin diffs. The Inferno ring gear is 43 teeth and the pinion is 10. That gives a 4.3 ratio vs. the stock 3.3. Maybe theres a 38 tooth ring gear available also,the Inferno gear sets I bought at my LHS are helical 43 tooth. |
Just doing a quick websearch I see the IS007 ring gear listed on different sites as 38 tooth on some and 43 tooth on others. If indeed I could get a 38/10 combo it would solve a lot of problems for me. Edit: counting the teeth on the picture above give me 43 teeth :( |
Quote:
What kinda set you got cookin? |
Wow yer right. That is straight off the Kyosho sight. After counting myself all three of those ring gears are 43t. The pinions however (according to the picture) are right. Damn I type too slow. Sorry Raptor. |
Nevermind brain fart. I thought the stock twin was 4.3, but it's 3.3. I need to figure out how to get it a little higher, like 3.0 or so. |
Bart Bender,sorry bud,I forgot about getting you the number for the short side shaft. The number for the shortside axle shaft(swing shaft according to the manual) is BS45. Psst,you might wanna edit the first post about the 38 tooth gear and change it to 43"thumbsup" |
Quote:
Raptor, noted and changed. It's a misprint on Kyoshos part. Lots of updates to the original post. |
Quote:
I believe he's got a rock racer brewin but he won't spill the beans:lol: I'm pretty sure he's gonna be running the same motor I'm running. Either way,it should be a HAUS!!!!8) |
That's cool. I'm building a crawling and XRRA course at my place next summer. |
Non Kyosho parts (update1) Here is some non Kyosho parts RC Alloys 304 axle shafts #RC-9003 http://www.rcalloys.com/madforce/images/mfouts01.jpg RC Alloys Drive Shafts #RC-9001S http://www.rcalloys.com/madforce/ima...haftsweb01.jpg RC Alloys Spool #RC-9005(no longer available) http://www.rcalloys.com/madforce/ima...lpricelist.jpg Maximizer Diff cups #2357 [color=red]Hell Fire Diff Cup w/outer bearings, screws, & shims. Also fits Twin Force/Mad Force[/color http://i17.photobucket.com/albums/b8.../27941_lrg.jpg Lockers #2356 http://i17.photobucket.com/albums/b8.../27940_lrg.jpg CDWGood luck getting these Billet Spools http://i17.photobucket.com/albums/b8...Fspools002.jpg Hot Bodies(Tower #'s)(HB #'s) 43t Helical ring gear LXJBM4C9010 (Lightning stadium) http://i17.photobucket.com/albums/b8...hbsc9010-1.jpg 10t Helical pinion gear LXJBM3C9009 (Lightning stadium) http://i17.photobucket.com/albums/b8...hbsc9009-1.jpg Complete diff #LXLGX0C8178 http://i17.photobucket.com/albums/b8...s/hbsc9978.jpg Diff spider gear set (hard steel) #LXLGV5C8101-1 http://i17.photobucket.com/albums/b8...hbsc9901-1.jpg 8x16mm bearings #LXJBE1C8020 http://i17.photobucket.com/albums/b8...s/hbsc8020.jpg |
|
Has anyone tried a complete diff from the HPI Hellfire or Hot Bodies Lightning? As an alternate because I find these in the LHs all the time. |
Quote:
Are those 1:8 scale? I'm not sure as I've never fooled with them. Are you needing a diff? |
Maximizer's site says the Hellfire is the same part. http://www.maximizerproducts.com/max...488fc0$9A$A0$B |
I have just been considering parts that are more available at LHS. I also saw one of those brands on tower with some kind of spiral cut on the diff and pinion gear. Here it is http://www2.towerhobbies.com/cgi-bin...1p?&I=LXJBM4&P= and http://www2.towerhobbies.com/cgi-bin...1p?&I=LXJBM3&P= |
Took some measurements of stock diff and bevel gear with digital caliper and its the same as Hellfire. Hellfire gearing is 10/42 Part #87008 on HPI's website. |
Quote:
Well,the ring gear is 43 teeth,just like the Twin gears and the pinion has an 8mm shaft like the Twin....so they might just work. I'd wanna mic them before I said they did work for sure though. Quote:
Having parts available is a great thing,don't get me wrong. One thing you need to figure though.....Once you upgrade to the helical cut gears and you shim them up right,your done. Thats one area you won't need to worry about. |
just to add to the part conversions. Jammin's CR and CRT diff's are a direct drop in for the 4.3 as well. I found out that the sportwerks diff's don't fit, which makes me to belive that the losi lst/8ight will not fit as well. My next try would be Hot Bodies. since there old lighting buggy used alot of kyosho parts as well. |
I've been looking at the hot bodies lightning and found RcMonster parts list for diffs is the same as Kyosho buggies. Took some measurments and it looks alike. I will go down LHS today to see if it is parts we could use. They got a nice spiral cut ring and pinion gear which is 10/43 gearing. Sorry guys diff is a 43. |
All times are GMT -6. The time now is 09:52 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com