Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > RC4WD Bully
Loading

Notices

Thread: Lilla My

Reply
 
LinkBack Thread Tools Display Modes
Old 05-18-2017, 03:12 AM   #1
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Lilla My

Lilla My



Technical data:
Axles: RC4WD Bully 2
Chassis: DravTech SuDu MOD 3D
Links: Dlux Fab
Motors: Holmes Hobbies Puller 500 Team 13t XX (coming)
ESC's: Holmes Hobbies Dual BR-Mini
Servo: Holmes Hobbies SHV500
Batteries: Turnigy Nano-Tech 850mAh 45-90C 3S LiPo
Tires: E.Y. Designs Narrowed Ottsix Voodoos (Narrow gold in front ja ultra narrow silver in rear)
Wheels: Dlux Solid Face CF (0.87" in front and 0.72" in rear)
Foams: Crawler Innovations Double Deuce (6.0" Soft in front with medium tuning foam ja 5.5" Medium in rear)
Shocks: DravTech Comp Shocks
Springs: DravTech Ultra soft
Radios: Sanwa MT-4
Skins: Krawler Konceptz
Else:
- DravTech servo tray
- DravTech battery tray
- DravTech electric tray
- Dlux fab brass knukcles
- Dlux fab titanium link sliders

Last edited by Zarizi Tech; 05-18-2017 at 04:05 AM.
Zarizi Tech is offline   Reply With Quote
Sponsored Links
Old 05-18-2017, 03:13 AM   #2
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

Chassis, links and suspension









Chassis: DravTech SuDu MOD 3D (145$)
Skins: DravTech SuDu MOD 3D (10$) or Krawler Konceptz (90$)



Links: Dlux Fab SuDu MOD 3D (95$)
Titanium link sliders: 8x Dlux Fab Titanium Link Sliders (32$)
Rod Ends: 8x Traxxas to upper links (6$) and 4x Revo (3$) also 4x Jato (3$) to lower links







Shocks: 2x DravTech Comp Shocks (80$) (Choose colour and pick medium springs)
Springs: DravTech Springs (5$) (Pick soft springs)
Rebuild kit: 2x Traxxas Big Bore Rebuild Kit (7,5$)
Rod ends: 2x Traxxas Short Rod Ends (7,5$)
Fluids: Team Losi Racing 15wt Shock Oil for shocks (4$) Associated Green Slime to O-Rings (3$)

Building costs so far: 401$
+ taxes and shipping costs

Last edited by Zarizi Tech; 05-19-2017 at 05:38 AM.
Zarizi Tech is offline   Reply With Quote
Old 05-18-2017, 03:13 AM   #3
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

Axles and tires

















Axles: RC4WD Bully 2 front axle (180$) and RC4WD Bully 2 rear axle (170$)
Knuckles: Dlux Fab Steering Knuckles (87$) (Choose: Brass - Axial Wraith/XR - Bully 2 - Nothing - Both single ended - Brass - Brass)
Front shafts: Dlux fab B2 - XR Universals (Ask Erik) (110$)
[[MODIFICATION: Inner diameter of the axle tubes need to be increased with 7mm drill. Axle housing from the shorter side needs to be drilled as well to make the shaft fit all the way to the locker.]]
Pinions: 2x Robinson Racing 14t (Choose 14t) (12$)
Battery mount: DravTech Bully 2 battery mount (13$)
Servo mount: DravTech Bully 2 servo mount (15$)
Electronics tray: DravTech Bully 2 electronics tray (18$)
Fluids: Vanquish Products Super Star Lube in the axles (8$)

















Wheels: Dlux 2.2 Wheels (Rear wheels, choose: Carbon fiber Solid face - Carbon fiber - 1.030 (.750) - Silver Stainless - Aluminium - Nothing) (Front wheels, choose: Carbon fiber Solid face - Carbon fiber - 1.155 (.875) - Silver Stainless - Aluminium - Nothing) (84$)
Tires: Front: Ottsix Voodoo Gold (Choose: Gold) / Narrowing service (72,5$) Rear: Ottsix Voodoo Silver (Choose: Silver) / Ultra narrowing service (70$)
Foams: Front: Crawler Innovations Double Deuce 6,0" Narrow Comp Cut inner - Soft Outer (18$) Rear: Crawler Innovations Double Deuce 5,5" Narrow Comp Cut inner - Medium outer (17$)
Wheel hubs: Front: Vanquish Products SLW 725 (19$) Rear: Vanquish Products SLW 225 (19$)
Hub screws: 2x Vanquish Products 4-40 Screws (11$)

Building costs so far: 1325$
+ taxes and shipping

Last edited by Zarizi Tech; 05-19-2017 at 05:28 AM.
Zarizi Tech is offline   Reply With Quote
Old 05-18-2017, 03:13 AM   #4
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

Electronics















Radios: Sanwa MT-4 (250$)
ESC's: Holmes Hobbies Torquemaster BR-Mini Dual (175$) (Choose: Install XT60 Plug - Nothing)
Motors: 2x Holmes Hobbies Puller 500 Team (Choose: TEAM Puller 500 Crawl 13t XX - Nothing - (your colour choise) - (your colour choise) - Forward (counterclockwise) - Yes) (250$)
Servo: Holmes Hobbies SVH 500 (120$) (Choose: No)
Batteries: 3x Turnigy Nano-Tech 850mAh 3S 45~90C Lipo Pack (33$)
Charger: Turnigy P606 LiPoly/LiFe AC/DC Charger (EU Plug) (US Plug) (UK Plug) (40$)













Building costs so far: 2193$
+ taxes and shipping

Last edited by Zarizi Tech; 05-19-2017 at 11:41 PM.
Zarizi Tech is offline   Reply With Quote
Old 05-18-2017, 03:14 AM   #5
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

Finishing touches and sum up













Screws, bolts and spacers: RC4WD Crawler Screw Bag (40$)
Servo horn: Robitronic 25T Servo Horn (16$)
Battery connectors: Male XT60 Connectors (2,5$)
Velco strap: Walkera Velco Strap 250mm (1$)
Battery holding peel: 3M Dual Lock (5$)
Heat shrink: Turnigy Heat Shrink 5mm (1,5$)
Zip ties: Cable Ties 150mm X 3mm (3$)

Final price: 2262$
+ taxes and shipping



Recommended setup

Shock building: DravTech Comp Shocks building guide
Knuckle building: Dlux Fab Knuckle building guide


Font upper link mount to the middle hole on the axle and upper links to the uppermost hole on the mount. Caster angel of the hubs should be close to zero degrees. Better to have slightly positive angle. Not much though.


Rear upper link mount to the middle hole on the axle and upper links to the middle hole on the link mount.


On front axle shocks should be on the highest hole and lower links on second lowest hole of the shock/link mount. Both should be attached inner side of axle.


On front axle the the shock/link mount should be attached to the outer holes on top of the axle.


On rear axle the shocks should be attached on the highest and lower links on second lowest holes of shock/link mount. Both should be attached inner side of axle.


On rear axle the shock/link mount should be attached on the outer holes on top of the axle.


Rear shocks should be attached to the first holes from rear with 3mm washer coming placed shock and chassis.


Front shocks should be attached to the third holes from the front with 6mm spacer placed between shock and chassis.


















Last edited by Zarizi Tech; 05-21-2017 at 03:58 PM.
Zarizi Tech is offline   Reply With Quote
Old 05-18-2017, 03:17 AM   #6
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

My purpose here is to make a proper build topic, where I will tell where to buy all the components needed on this build with their links and costs. With this topic you can select all the stuff to shopping carts and order everything if you want. It's well proven to be world class setup finishing on podium in 2016 Worlds.

I will start updating, please subscribe.
Zarizi Tech is offline   Reply With Quote
Old 05-18-2017, 07:59 PM   #7
Rock Stacker
 
Join Date: Aug 2013
Location: NZ
Posts: 59
Default Re: Lilla My

Ermmm so the total cost of $401 + tax & shipping, that must not include the axles you have pictured?
Perhaps a bit misleading as you say "building costs so far $401 + tax + shipping", and show a picture with the chassis, axles, links and everything else together.


So its $401 + tax + shipping + how much for the axles?
Or how is it so cheap? free axles?
Cool build though

Last edited by nzcrawl; 05-18-2017 at 08:02 PM.
nzcrawl is offline   Reply With Quote
Old 05-18-2017, 08:37 PM   #8
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,784
Default Re: Lilla My

Follow along to the next installment , that's where he builds axles and tires, I suspect host will be part


Hang up and Drive
mikemcE is offline   Reply With Quote
Old 05-19-2017, 05:29 AM   #9
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

Quote:
Originally Posted by nzcrawl View Post
Ermmm so the total cost of $401 + tax & shipping, that must not include the axles you have pictured?
Perhaps a bit misleading as you say "building costs so far $401 + tax + shipping", and show a picture with the chassis, axles, links and everything else together.


So its $401 + tax + shipping + how much for the axles?
Or how is it so cheap? free axles?
Cool build though
Sorry about the misleading pics. I hope it will be more clear to you if you look now the next phase, that I updated there.

Quote:
Originally Posted by mikemcE View Post
Follow along to the next installment , that's where he builds axles and tires, I suspect host will be part
Exactly.
Zarizi Tech is offline   Reply With Quote
Old 05-19-2017, 11:42 PM   #10
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

Next phase: electronics added to fourth message.
Zarizi Tech is offline   Reply With Quote
Old 05-20-2017, 04:58 AM   #11
Pebble Pounder
 
Join Date: Nov 2013
Location: Southeast MI
Posts: 153
Default Re: Lilla My

Really great to have a "cheat sheet" here that is pretty close to the plan I was putting together. Thanks :-)
karajabola is offline   Reply With Quote
Old 05-20-2017, 06:01 AM   #12
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,784
Default Re: Lilla My

Rolls Royce of crawlers. First class !


Hang up and Drive
mikemcE is offline   Reply With Quote
Old 05-20-2017, 06:14 AM   #13
Quarry Creeper
 
Join Date: Feb 2012
Location: Alphen Aan Den Rijn
Posts: 254
Default Re: Lilla My

No bec option on the dual esc from holmes ????
roxx is offline   Reply With Quote
Old 05-20-2017, 06:58 AM   #14
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,784
Default Re: Lilla My

No need for a bec, the servo is powered direct off the batt


Hang up and Drive
mikemcE is offline   Reply With Quote
Old 05-20-2017, 12:48 PM   #15
Quarry Creeper
 
Join Date: Apr 2012
Location: So. Cal.
Posts: 264
Default Re: Lilla My

Quote:
Originally Posted by mikemcE View Post
No need for a bec, the servo is powered direct off the batt


Hang up and Drive
So you just cut the connector off that Holmes servo and wire it up with the ESC battery wires like you would a BEC I assume?
cloudswimmer is offline   Reply With Quote
Old 05-20-2017, 02:28 PM   #16
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,784
Default Re: Lilla My

Nada..... plug and play



Hang up and Drive
mikemcE is offline   Reply With Quote
Old 05-20-2017, 02:29 PM   #17
Quarry Creeper
 
Join Date: Dec 2016
Location: westlerly
Posts: 303
Default Re: Lilla My

I thought Erik wasn't making the xr unis for bully 2s anymore. I've asked not very long ago.
Evo93 is offline   Reply With Quote
Old 05-21-2017, 04:02 PM   #18
RCC Addict
 
Join Date: Jun 2007
Location: Finland
Posts: 1,544
Default Re: Lilla My

The last update is now added on the fifth message of this thread. I do hope this will help people finding parts and tuning their SuDu Bullies.

Quote:
Originally Posted by karajabola View Post
Really great to have a "cheat sheet" here that is pretty close to the plan I was putting together. Thanks :-)
No problemos, hope this will help you!

Quote:
Originally Posted by mikemcE View Post
Rolls Royce of crawlers. First class !
Yeah, it is a pretty decent setup, thanks!

Quote:
Originally Posted by roxx View Post
No bec option on the dual esc from holmes ????
No need, since I can run power straight from battery to servo.

Quote:
Originally Posted by Evo93 View Post
I thought Erik wasn't making the xr unis for bully 2s anymore. I've asked not very long ago.
That might be true. Well, every job has it cost. I bet he can come up with alternative if needed.
Zarizi Tech is offline   Reply With Quote
Old 05-21-2017, 11:27 PM   #19
Pebble Pounder
 
Join Date: Jul 2011
Location: Germany
Posts: 197
Default Re: Lilla My

Excellent write-up! Thanks for sharing Samu
Rockatanski is offline   Reply With Quote
Old 05-26-2017, 01:03 PM   #20
RCC Addict
 
Join Date: Nov 2011
Location: Surrey,BC- Canada
Posts: 1,663
Default Re: Lilla My

Sweet write up bud, But dam Samu did you really have to tell us how much we really spent on our toy cars

Last edited by chevotafun; 05-26-2017 at 01:14 PM.
chevotafun is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com