| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
10-15-2021, 03:23 AM
| #1 |
| Newbie Join Date: Oct 2021 Location: Jönköping
Posts: 7
|  Unnamed rally car project (1/10)
So, decided to build a 1/10 rally car with a center differential and belts instead of shaft. Did some thinking and drawing and ended up with this. Based on a Xray XB4 high volume differential. Put the diff case in the lathe and removed the bottom. Made a new out of 6082-T6 aluminum. Used a diff cross pin from Xray X1 so the bevel gear axle could run through the differential. The concept worked.     Last edited by Karl_Hungus; 10-15-2021 at 03:29 AM. |
|  |
| Sponsored Links | |
| | |
|
10-15-2021, 03:30 AM
| #2 |
| Newbie Join Date: Oct 2021 Location: Jönköping
Posts: 7
| Re: Unnamed rally car project (1/10)
First mockup.    Skickat från min AC2003 via Tapatalk |
|
| |
|
10-15-2021, 03:32 AM
| #3 |
| Newbie Join Date: Oct 2021 Location: Jönköping
Posts: 7
| Re: Unnamed rally car project (1/10)
Version 4 of the differential since the first 3 wasn't long enough. Had to "make" a new spur since Xray don't have a 87T for their differentials, only for their slippers.     Skickat från min AC2003 via Tapatalk |
|
| |
|
10-15-2021, 03:33 AM
| #4 |
| Newbie Join Date: Oct 2021 Location: Jönköping
Posts: 7
| Re: Unnamed rally car project (1/10)
First batch of belts came. So cool to be able to just make a phone call and order the belts you need for a fraction of the price Tamiya or any other brands charge and have them delivered 2 days later  Only problem is that I ordered too short rear belt   Skickat från min AC2003 via Tapatalk |
|
| |
|
10-15-2021, 03:36 AM
| #5 |
| Newbie Join Date: Oct 2021 Location: Jönköping
Posts: 7
| Re: Unnamed rally car project (1/10)
Moving the servo to the Center of the car requires a new part for the steering. And since I can't buy what I need, I had to make one  New on the  Old on the     Skickat från min AC2003 via Tapatalk |
|
| |
|
10-15-2021, 03:40 AM
| #6 |
| Newbie Join Date: Oct 2021 Location: Jönköping
Posts: 7
| Re: Unnamed rally car project (1/10)
This is what it looks like today, it's too wide at the moment so I'll have to manufacture some differential mounts so I can use the XV-01 suspension mounts instead of the TA-06. The differential will be mounted on the suspension mounts instead of the chassis to get the clearance needed for the XV-01 suspension arms.  Skickat från min AC2003 via Tapatalk |
|
| |
|
10-15-2021, 12:07 PM
| #7 |
| I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,282
| Re: Unnamed rally car project (1/10)
Wild man. Some out if the box thinking going on here. Is the center diff still sealed? |
|
| |
|
10-15-2021, 03:44 PM
| #8 |
| Newbie Join Date: Oct 2021 Location: Jönköping
Posts: 7
| Re: Unnamed rally car project (1/10)
Yes, sealed and filled �� But I might have to make a fifth version, not entirely satisfied yet. |
|
| |
|
05-17-2022, 01:12 AM
| #9 |
| Newbie Join Date: Nov 2021 Location: Finland
Posts: 2
| Re: Unnamed rally car project (1/10)
Just found this thread, very interesting project! What has happened to the car since the last post, is it completed? I would love to see and read more about this kind of car building.
|
|
| |
|
07-01-2022, 04:47 PM
| #10 |
| Quarry Creeper Join Date: Jun 2013 Location: Portugal
Posts: 435
| Re: Unnamed rally car project (1/10)
Curious on how this will end
|
|
| |
|
10-03-2022, 10:07 AM
| #11 |
| I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,282
| Re: Unnamed rally car project (1/10)
Me too. Any updates? |
|
| |
|
Unnamed rally car project (1/10) - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Project Budget WarPig/Wife's Rig Unnamed | CamposZac96x | Axial SCX-10 | 10 | 01-23-2013 04:16 AM |
| New Traxxas Rally: 1/16th Rally Car | Szczerba | Chit Chat | 20 | 10-05-2010 10:26 PM |
| 1:6 build up, project unnamed | scalecrawler | General Crawlers | 12 | 08-07-2007 10:23 AM |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
