RCCrawler Forums

ferp420 · 06-23-2020, 09:14 AM

i would like to see a 12v servo conversion kit basicly a tiny esc programed to work for a servo to make cheap servos run off of a 3s or 4s batterys lots of people burn out there servos that could fix them
it would be realy trick if it could fit inside the servo case

RockCrawlingKid · 07-04-2020, 09:01 AM

Im loving the sport motor series really well put together. I can’t wait for my 13t crawlmaster sport 540 to show up in the mail to replace the stock motor that currently propels my gen8.I’m in Canada and found one from a shop up here in Quebec. I see now that you just got new 550 cans in stock and was going to order a 550 out of fear that I would want to stick with the larger can. But shipping to Canada is the same price as one motor. I think I’m just going to wait and see how the 540 size performs. Hopefully scale trucks Canada gets some new 550 in stock

I wonder John if it would be helpful for those less versed in terms and spec if you listed a factory 3 slot turn# equivalent into your descriptions. Kv listing is nice but I just feel like it would make it easier for people to make the choice of winding for their intentions.

high plains drifter · 07-04-2020, 09:17 AM

Because of the kind of year it's been and the fact that sometimes we forget about the truly important things in life... What I would like to see in Holmes Hobby is health to John R. Holmes and family. I hope to see HH continuing to stay passionately involved in the RC hobby as well as remaining prosperous in all their endeavors. Holmes Hobbies has brought integrity, transparency, and loyalty to the RC community and I hope for nothing but good things for the future of this company. Thank you, John for all that you do... Your hard work and devotion does not go unnoticed nor unappreciated.

toy4crawlin · 09-07-2020, 10:16 PM

Hi John
Have been enjoying your products over a decade.
Would like to see motors that are lighter in weight

Also, an easier way to re sync or config dual MOA esc's. I was crawling just fine through 2 battery packs, then I set my moa for a pause for few minutes, then tried to drive again and only the rear would drive. what happened, How do I get he front esc to sync again?

Deezul · 10-27-2020, 08:39 PM

Really need something for the scx24. I wanted the 380 out runner but it’s unobtanium

Timmahh · 10-27-2020, 08:52 PM

High Torque High RPM No Prep Drag Motors.

mtbmonkey · 10-28-2020, 11:37 AM

Quote:

Originally Posted by Deezul

Really need something for the scx24. I wanted the 380 out runner but it’s unobtanium

I agree! Something for the micro crawlers would be amazing.

nathanotis · 10-28-2020, 02:37 PM

Quote:

Originally Posted by mtbmonkey

I agree! Something for the micro crawlers would be amazing.

Agreed!

austin-92 · 10-28-2020, 05:17 PM

1. Stuff in stock so I can buy some of your awesome products!

2. Agree with the post above on a budget servo. Something in the 50-70$ range

3. John to continue to make posts here and YouTube videos. It definitely gives me a better feeling about purchases when they’re associated with a face rather than just a website.

Sent from my iPhone using Tapatalk

chevotafun · 12-22-2020, 10:20 AM

I would like to wish everyone over at HH a Merry Christmas and Happy New Years. Been using your product for 8 years now, but nothing drives me up the wall more than wanting to buy something and can't get it cause its out of stock.

What i would like to see from HH in the new year is to actually have things in stock.

Taper · 07-12-2021, 01:16 PM

Longer wires +/- to feed servos and black wires for servos instead red/yellow/black you put now, only for a appearance.

MOguy · 12-21-2021, 07:40 AM

Something similar to the Copperhead but with no case.

Light weight 4S ESC with a decent internal BEC for sensor and sensorless.

mtnbiker4evr13 · 01-12-2022, 10:58 AM

Quote:

Originally Posted by austin-92

2. Agree with the post above on a budget servo. Something in the 50-70$ range

3. John to continue to make posts here and YouTube videos. It definitely gives me a better feeling about purchases when they’re associated with a face rather than just a website.

Sent from my iPhone using Tapatalk

Yes to #2 and #3! HH videos are great. More HH hard parts would certainly be worth a look after the success of the Sherpa chassis. HH light/winch/accessory controllers would also be interesting.

guido_owl · 02-02-2022, 02:55 PM

Quote:

Originally Posted by MOguy

Something similar to the Copperhead but with no case.

Light weight 4S ESC with a decent internal BEC for sensor and sensorless.

Yes, I agree... and (if possible) with the Holmes Hold option (that could be turned on or off by user with Castle Link or similar)!

desousab · 06-01-2022, 08:23 PM

stock...

Thorsteenster · 11-30-2022, 08:01 AM

I'm still waiting on a sensored outrunner...

MOguy · 12-05-2022, 01:55 PM

Quote:

Originally Posted by Thorsteenster

I'm still waiting on a sensored outrunner...

Try a Revolver with a Crawl Master Mini V2. It is smooth. The startup is even much smoother than my Tenkin Roc with on a MambaX. The wheel speed and kick are also better.

Thorsteenster · 01-31-2023, 06:14 AM

Quote:

Originally Posted by MOguy

Try a Revolver with a Crawl Master Mini V2. It is smooth. The startup is even much smoother than my Tenkin Roc with on a MambaX. The wheel speed and kick are also better.

Ha, I only posted that being I remember way back he was developing a sensored outrunner. Turns out he did and it's come and gone, I just flipped through the whole thread.
Sensored Outrunner motors- Revolver S

Once I upgrade the servos on my Capra I'll go direct power and get rid of my external BEC then look at going to a Crawlmaster to replace the MMXV2.
For now I'll just get a Revolver

06-23-2020, 09:14 AM	#61
ferp420 I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on Posts: 3,684	Re: What would you like to see in Holmes Hobbies i would like to see a 12v servo conversion kit basicly a tiny esc programed to work for a servo to make cheap servos run off of a 3s or 4s batterys lots of people burn out there servos that could fix them it would be realy trick if it could fit inside the servo case

07-04-2020, 09:01 AM	#62
RockCrawlingKid Quarry Creeper Join Date: Jan 2008 Location: Edmonton, AB Posts: 443	Re: What would you like to see in Holmes Hobbies Im loving the sport motor series really well put together. I can’t wait for my 13t crawlmaster sport 540 to show up in the mail to replace the stock motor that currently propels my gen8.I’m in Canada and found one from a shop up here in Quebec. I see now that you just got new 550 cans in stock and was going to order a 550 out of fear that I would want to stick with the larger can. But shipping to Canada is the same price as one motor. I think I’m just going to wait and see how the 540 size performs. Hopefully scale trucks Canada gets some new 550 in stock I wonder John if it would be helpful for those less versed in terms and spec if you listed a factory 3 slot turn# equivalent into your descriptions. Kv listing is nice but I just feel like it would make it easier for people to make the choice of winding for their intentions.

07-04-2020, 09:17 AM	#63
high plains drifter RCC Addict Join Date: Nov 2017 Location: Austin Texas Posts: 1,493	Re: What would you like to see in Holmes Hobbies Because of the kind of year it's been and the fact that sometimes we forget about the truly important things in life... What I would like to see in Holmes Hobby is health to John R. Holmes and family. I hope to see HH continuing to stay passionately involved in the RC hobby as well as remaining prosperous in all their endeavors. Holmes Hobbies has brought integrity, transparency, and loyalty to the RC community and I hope for nothing but good things for the future of this company. Thank you, John for all that you do... Your hard work and devotion does not go unnoticed nor unappreciated.

09-07-2020, 10:16 PM	#64
toy4crawlin I wanna be Dave Join Date: Feb 2006 Location: Campbell, CA 4 hrs 2Rubicon ! Posts: 2,044	Re: What would you like to see in Holmes Hobbies Hi John Have been enjoying your products over a decade. Would like to see motors that are lighter in weight Also, an easier way to re sync or config dual MOA esc's. I was crawling just fine through 2 battery packs, then I set my moa for a pause for few minutes, then tried to drive again and only the rear would drive. what happened, How do I get he front esc to sync again?

10-27-2020, 08:39 PM	#65
Deezul RCC Addict Join Date: Feb 2006 Location: ccxc Posts: 1,176	Re: What would you like to see in Holmes Hobbies Really need something for the scx24. I wanted the 380 out runner but it’s unobtanium

10-27-2020, 08:52 PM	#66
Timmahh RCC Addict Join Date: Jun 2008 Location: Mudville Posts: 1,527	Re: What would you like to see in Holmes Hobbies High Torque High RPM No Prep Drag Motors.

10-28-2020, 05:17 PM	#69
austin-92 Pebble Pounder Join Date: Aug 2020 Posts: 134	Re: What would you like to see in Holmes Hobbies 1. Stuff in stock so I can buy some of your awesome products! 2. Agree with the post above on a budget servo. Something in the 50-70$ range 3. John to continue to make posts here and YouTube videos. It definitely gives me a better feeling about purchases when they’re associated with a face rather than just a website. Sent from my iPhone using Tapatalk

12-22-2020, 10:20 AM	#70
chevotafun RCC Addict Join Date: Nov 2011 Location: Surrey,BC- Canada Posts: 1,663	Re: What would you like to see in Holmes Hobbies I would like to wish everyone over at HH a Merry Christmas and Happy New Years. Been using your product for 8 years now, but nothing drives me up the wall more than wanting to buy something and can't get it cause its out of stock. What i would like to see from HH in the new year is to actually have things in stock.

07-12-2021, 01:16 PM	#71
Taper Quarry Creeper Join Date: Feb 2007 Location: Lleida Posts: 279	Re: What would you like to see in Holmes Hobbies Longer wires +/- to feed servos and black wires for servos instead red/yellow/black you put now, only for a appearance.

12-21-2021, 07:40 AM	#72
MOguy Rock Crawler Join Date: Feb 2020 Location: Fort Leonard Wood Posts: 868	Re: What would you like to see in Holmes Hobbies Something similar to the Copperhead but with no case. Light weight 4S ESC with a decent internal BEC for sensor and sensorless. Last edited by MOguy; 12-21-2021 at 07:51 AM.

06-01-2022, 08:23 PM	#75
desousab Newbie Join Date: Feb 2021 Location: Canada Posts: 8	Re: What would you like to see in Holmes Hobbies stock...

11-30-2022, 08:01 AM	#76
Thorsteenster I wanna be Dave Join Date: May 2006 Location: Arlington, VA Posts: 3,365	Re: What would you like to see in Holmes Hobbies I'm still waiting on a sensored outrunner...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

RCCrawler Forums

Thread: What would you like to see in Holmes Hobbies