Lilla My Lilla My https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Technical data: Axles: RC4WD Bully 2 Chassis: DravTech SuDu MOD 3D Links: Dlux Fab Motors: Holmes Hobbies Puller 500 Team 13t XX (coming) ESC's: Holmes Hobbies Dual BR-Mini Servo: Holmes Hobbies SHV500 Batteries: Turnigy Nano-Tech 850mAh 45-90C 3S LiPo Tires: E.Y. Designs Narrowed Ottsix Voodoos (Narrow gold in front ja ultra narrow silver in rear) Wheels: Dlux Solid Face CF (0.87" in front and 0.72" in rear) Foams: Crawler Innovations Double Deuce (6.0" Soft in front with medium tuning foam ja 5.5" Medium in rear) Shocks: DravTech Comp Shocks Springs: DravTech Ultra soft Radios: Sanwa MT-4 Skins: Krawler Konceptz Else: - DravTech servo tray - DravTech battery tray - DravTech electric tray - Dlux fab brass knukcles - Dlux fab titanium link sliders |
Re: Lilla My Axles and tires https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Axles: RC4WD Bully 2 front axle (180$) and RC4WD Bully 2 rear axle (170$) Knuckles: Dlux Fab Steering Knuckles (87$) (Choose: Brass - Axial Wraith/XR - Bully 2 - Nothing - Both single ended - Brass - Brass) Front shafts: Dlux fab B2 - XR Universals (Ask Erik) (110$) [[MODIFICATION: Inner diameter of the axle tubes need to be increased with 7mm drill. Axle housing from the shorter side needs to be drilled as well to make the shaft fit all the way to the locker.]] Pinions: 2x Robinson Racing 14t (Choose 14t) (12$) Battery mount: DravTech Bully 2 battery mount (13$) Servo mount: DravTech Bully 2 servo mount (15$) Electronics tray: DravTech Bully 2 electronics tray (18$) Fluids: Vanquish Products Super Star Lube in the axles (8$) https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Wheels: Dlux 2.2 Wheels (Rear wheels, choose: Carbon fiber Solid face - Carbon fiber - 1.030 (.750) - Silver Stainless - Aluminium - Nothing) (Front wheels, choose: Carbon fiber Solid face - Carbon fiber - 1.155 (.875) - Silver Stainless - Aluminium - Nothing) (84$) Tires: Front: Ottsix Voodoo Gold (Choose: Gold) / Narrowing service (72,5$) Rear: Ottsix Voodoo Silver (Choose: Silver) / Ultra narrowing service (70$) Foams: Front: Crawler Innovations Double Deuce 6,0" Narrow Comp Cut inner - Soft Outer (18$) Rear: Crawler Innovations Double Deuce 5,5" Narrow Comp Cut inner - Medium outer (17$) Wheel hubs: Front: Vanquish Products SLW 725 (19$) Rear: Vanquish Products SLW 225 (19$) Hub screws: 2x Vanquish Products 4-40 Screws (11$) Building costs so far: 1325$ + taxes and shipping |
Re: Lilla My Electronics https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Radios: Sanwa MT-4 (250$) ESC's: Holmes Hobbies Torquemaster BR-Mini Dual (175$) (Choose: Install XT60 Plug - Nothing) Motors: 2x Holmes Hobbies Puller 500 Team (Choose: TEAM Puller 500 Crawl 13t XX - Nothing - (your colour choise) - (your colour choise) - Forward (counterclockwise) - Yes) (250$) Servo: Holmes Hobbies SVH 500 (120$) (Choose: No) Batteries: 3x Turnigy Nano-Tech 850mAh 3S 45~90C Lipo Pack (33$) Charger: Turnigy P606 LiPoly/LiFe AC/DC Charger (EU Plug) (US Plug) (UK Plug) (40$) https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Building costs so far: 2193$ + taxes and shipping |
Re: Lilla My Finishing touches and sum up https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Screws, bolts and spacers: RC4WD Crawler Screw Bag (40$) Servo horn: Robitronic 25T Servo Horn (16$) Battery connectors: Male XT60 Connectors (2,5$) Velco strap: Walkera Velco Strap 250mm (1$) Battery holding peel: 3M Dual Lock (5$) Heat shrink: Turnigy Heat Shrink 5mm (1,5$) Zip ties: Cable Ties 150mm X 3mm (3$) Final price: 2262$ + taxes and shipping Recommended setup Shock building: DravTech Comp Shocks building guide Knuckle building: Dlux Fab Knuckle building guide https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Font upper link mount to the middle hole on the axle and upper links to the uppermost hole on the mount. Caster angel of the hubs should be close to zero degrees. Better to have slightly positive angle. Not much though. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Rear upper link mount to the middle hole on the axle and upper links to the middle hole on the link mount. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller On front axle shocks should be on the highest hole and lower links on second lowest hole of the shock/link mount. Both should be attached inner side of axle. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller On front axle the the shock/link mount should be attached to the outer holes on top of the axle. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller On rear axle the shocks should be attached on the highest and lower links on second lowest holes of shock/link mount. Both should be attached inner side of axle. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller On rear axle the shock/link mount should be attached on the outer holes on top of the axle. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Rear shocks should be attached to the first holes from rear with 3mm washer coming placed shock and chassis. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller Front shocks should be attached to the third holes from the front with 6mm spacer placed between shock and chassis. https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller https://zarizitech.nn.fi/kuvat/Lilla...pg?img=smaller |
Re: Lilla My My purpose here is to make a proper build topic, where I will tell where to buy all the components needed on this build with their links and costs. With this topic you can select all the stuff to shopping carts and order everything if you want. It's well proven to be world class setup finishing on podium in 2016 Worlds. I will start updating, please subscribe. "thumbsup""thumbsup" |
Re: Lilla My Ermmm so the total cost of $401 + tax & shipping, that must not include the axles you have pictured? Perhaps a bit misleading as you say "building costs so far $401 + tax + shipping", and show a picture with the chassis, axles, links and everything else together. So its $401 + tax + shipping + how much for the axles? Or how is it so cheap? free axles? Cool build though |
Re: Lilla My Follow along to the next installment , that's where he builds axles and tires, I suspect host will be part Hang up and Drive |
Re: Lilla My Quote:
Quote:
|
Re: Lilla My Next phase: electronics added to fourth message. "thumbsup" |
Re: Lilla My Really great to have a "cheat sheet" here that is pretty close to the plan I was putting together. Thanks :-) |
Re: Lilla My Rolls Royce of crawlers. First class ! Hang up and Drive |
Re: Lilla My No bec option on the dual esc from holmes ???? |
Re: Lilla My No need for a bec, the servo is powered direct off the batt Hang up and Drive |
Re: Lilla My Quote:
|
Re: Lilla My |
Re: Lilla My I thought Erik wasn't making the xr unis for bully 2s anymore. I've asked not very long ago. |
Re: Lilla My The last update is now added on the fifth message of this thread. "thumbsup" I do hope this will help people finding parts and tuning their SuDu Bullies. 8) Quote:
Quote:
Quote:
Quote:
|
Re: Lilla My Excellent write-up! Thanks for sharing Samu [emoji106][emoji106][emoji106] |
Re: Lilla My Sweet write up bud, But dam Samu did you really have to tell us how much we really spent on our toy cars :lmao::lmao:"thumbsup" |
All times are GMT -6. The time now is 09:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com